Warning Function; Instruction Message Display; Warning Beeping Sound - Alfa Network Next 100 Instruction Manual

Warning Function

v Instruction message display
The sewing machine is in trouble
The animation message means that the
thread is twisted or jammed and the hand
wheel axle cannot move. Please look through
the "Trouble shooting guide" to find the
solution. When the problem is solved the
machine will continue sewing.
v Warning beeping sound
- When operating correctly: 1 beep.
- When operating incorrectly: 3-short beeps.
- When the sewing machine is in trouble
and can't sew: 3-short beeps.
It means that the thread is twisted or jammed
and the hand wheel axle can't move. Please
look through the "Trouble shooting guide" to
find the solution. After the problem has been
solved, the machine will continue to sew.
Return bobbin winder spindle to left
If you press any button on the machine when
the bobbin is full or the bobbin winder spindle
is in the right position, then the machine will
beep 3 times as a warning.
Return the bobbin winder spindle to the left
position.
Note:
If the problem is still not solved, please
contact your local dealer.
Attention:
During the sewing, if the thread get jammed
inside the hook stopping the needle from
moving and you continue pressing the foot
control, the security switch will stop the
machine completely. In order to restart the
sewing machine, you will have to turn the on/
off switch to the OFF position and then ON
again.
53