Changing The Presser Foot; Removing The Presser Foot; Attaching The Presser Foot; Removing And Inserting The Presser Foot Holder - Alfa Network Next 100 Instruction Manual

Changing the presser foot

1
1
2
1
2
1
2
Attention:
Turn the power switch to off ("O") when
carrying out any of the below operations!
v Removing the presser foot
Raise the presser foot. Press the lever and
the foot disengages.
Lever
1
v Attaching the presser foot
Lower the presser foot holder until the cut-out
is directly above the pin.
Press the lever.
The presser foot engages automatically.
Cut-out
1
Pin
2
v Removing and inserting the
presser foot holder
Raise the presser foot bar. Align the presser
foot holder with the lower left side of the
presser bar. Hold the presser foot holder, then
tighten the screw using the screwdriver.
Presser foot bar
1
2 Presser foot holder
v Insertingthe edge/ quilting guide
Insert the edge/ quilting guide in the slot as
illustrated. Adjust according to need for hems,
pleats, etc.
1 Slot
Edge/quilting guide
2
14