Button Sewing - Alfa Network Next 100 Instruction Manual

Button sewing

Buttons can be sewn on with the sewing machine. Buttons with 2 or 4 holes cna be attached.
27
1
Move the drop feed lever to lower the feed
dogs.
1 Lowered position
Position the work under the foot. Place the
button in the desired position, lower the foot.
Adjust the stitch width according to the
distance between the two holes of the button.
Turn the handwheel to check that the needle
goes cleanly into the left and right holes of the
button.
If a shank is required, place a darning needle
on top of the button and sew.
Pull end of the upper thread to the reverse
side of the fabric, then tie it with the bobbin
thread.
For buttons with 4 holes, sew through the
front two holes first, push work forward and
then sew through the back two holes.
Note:
When you finish the work, move the drop feed
lever to raise the feed dogs.
1 Raised position
39