Using the needle threader
1
2
Attention:
Turn the power switch to the off position ("O").
Raise the needle to its highest position and
lower the presser foot.
Pass the thread around the thread guide.
Thread guide
1
Press the lever down as far as it goes.
The needle threader turns automatically to the
1
threading position and the hook pin passes
through the needle eye.
1
Needle
Hook
2
Take the thread in front of the needle.
Hold the thread loosely and release the lever
slowly. The hook turns and passes the thread
through the needle eye forming a loop.
Pull the thread through the needle eye.
10