Winding The Bobbin - Alfa Network Next 100 Instruction Manual

Winding the bobbin

1
2
5
1. Place the thread and spool holder onto
the spool pin. For smaller spools of
thread, place the spool holder with the
small side next to the spool or use the
small spool holder.
2. Draw the thread from the spool through
the upper thread guide.
3. Wind the thread contrary clockwise
around the bobbin winder tension discs.
4. Place the thread end through one of the
inner holes as illustrated and place the
empty bobbin on the spindle.
Notch
1
Bobbin winder shaft spring
2
5. Push the bobbin to the right. When the
bobbin winder shaft is pushed to the right,
the number display will show "SP".