Inserting A Side Zipper - Alfa Network Next 100 Instruction Manual

3
5
4
1
2
6
41
v Inserting a side zipper
Place the right sides of the fabric together.
Sew a bottom seam 2cm from the right edge
of the zipper bottom stop position. Sew a few
stitches in reverse lock. Increase the stitch
length to maximum, set the tension below 2
and baste the remaining length of the fabric.
Fold back to the left the seam allowance. Turn
under the right the seam allowance to form a
3mm fold.
Reverse side
1
5mm
2
3 2cm
Basting stitching
4
Reverse stitches
5
6 3mm
Attach the right side of the presser foot pin
to the holder when sewing the left side of the
zipper.
Attach the left side of the presser foot pin to
the presser foot holder when sewing the right
side of the zipper.
Sew the zipper to the piece of fabric with
the extra 3mm, starting from the base of the
zipper. When you are about 5cm from the end
of the zipper, stop the sewing machine with
the needle lowered (in the fabric), raise the
presser foot lever, and then open the zipper
and continue sewing.
Turn the fabric right side out, stitch across the
lower end and the right side of the zipper.
Stop about 5cm from the top of the zipper.
Remove the basting stitching and open the
zipper. Stitch the remaining of the seam.