Table of Contents
Advertisement
- Touching a sensor once:
The last temperature selected
flashes.
- Each subsequent touch of the
sensor:
Adjusts the temperature shown in
1 °C increments.
- Leaving a finger on the sensor:
Changes the temperature continu-
ously.
A negative tone will sound (if the
keypad tone is switched on) when
the lowest or highest possible tem-
perature is reached.
Approximately 5 seconds after the last
time a sensor has been touched, the
actual temperature inside the wine con-
ditioning zone is automatically shown.
When the temperature is altered, there
is a short delay until the temperature
selected is set.
The temperature display on the control
panel always shows the actual tem-
perature.
Temperature range
In all three zones it is possible to set
temperatures between 5 and 20 °C.
The optimum temperature and air quality
Temperature display
In normal operation the temperature
display shows the actual temperature in
the zone.
If the temperature in one of the zones is
not within the range that the appliance
is able to display, dashes will light up in
the temperature display.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature in the display.
25
Advertisement
Table of Contents
