Table of Contents
Advertisement
Remove screw .
Pull out soft-close mechanism and
remove.
Push spacer to the side of the ap-
pliance and remove.
Rotate spacer through 180° and
refit it on the opposite side. Push the
spacer along as far as it will go.
Rotate soft-close mechanism
through 180°. Attach the soft-close
mechanism onto the outside first.
Secure spacer to soft-close mech-
anism with screw .
Caution.
Danger of injury.
Do not move the front part of the
soft-close mechanism in the direc-
tion shown once safety device has
been removed.
Changing the door hinging
Remove red safety device from the
soft-close mechanism.
Refit cover onto the soft-close
mechanism.
Put red safety device back onto
the soft-close mechanism.
Secure cover with screws .
59
Advertisement
Table of Contents
