Wooden Shelves; Moving The Wooden Shelves - Miele KWT 6833 SG Operating And Installation Instructions

Wine conditioning unit
Hide thumbs Also See for KWT 6833 SG:
Table of Contents

Advertisement

Wooden shelves

The wooden shelves are on telescopic
runners which can be pulled out to
make it easier to store and remove
bottles. There are two wooden shelves
on runners in the middle and lower
zones (the second and third shelf from
the top in each zone) which can be
pulled right out. The remaining wooden
shelves can be partially pulled out.
Please note that the uppermost run-
ners in each of the three zones are
only suitable for shallow wooden
shelves.
Storing wine bottles

Moving the wooden shelves

The wooden shelves can be removed
and replaced again if required.
 Pull the wooden shelf out until it
stops, then lift it up and off the run-
ners. Hold onto the frame to do this.
 If you require more room (e.g. to set
up the bottle presenter), cover the top
runners which are not now needed on
both sides with the covers supplied.
The thicker side of the cover should
point forwards. The covers are held in
position with magnets.
 To replace the shelf, click it into place
on the extended runners. The mag-
netic strip should be pointing for-
wards.
33

Advertisement

Table of Contents
loading

Table of Contents