QDI Advance 5/133E Manual page 37

Table of Contents

Advertisement

l
Boot Up
O n
Numlock Status
Off
Gate A20
Normal
l
Option
Fast
l
Memory Parity/
Enabled
ECC Check
Disabled
l
Password Setting
System
Setup
IDE Second
Enabled
l
Channel Control
Disabled
l
OS Select For
Non-OS2
DRAM>64MB
OS2
l
HDD S.M.A.R.T
Enabled
Capability
Disabled
Video BIOS
Enabled
l
Shadow
Disabled
C8000~CBFFF
Enabled
l
Shadow:
DC000-DFFFF
Shadow:
Disabled
Delay For HDD
0~15
l
0~15 (Secs):
Show Bootup
Disabled
l
Logo
Enabled
Flash Write
Enabled
l
Protect
Disabled
Keypad is used as number keys.
Keypad is used as arrow keys.
The A20 signal is controlled by the keyboard controller
or chipset hardware.
Default setting. The A20 signal is controlled by Port 92
or the chipset specific method.
Enables the Error Checking & Correction if ECC
memory is used.
Disables the ECC function.
The system will not boot and access to BIOS
Setup will be denied if the correct password is
not entered when prompted.
The system will boot up, but access to BIOS
Setup will be denied if the correct password is not
entered when prompted.
Enables the second IDE channel.
Disables the second IDE channel and releases the
IRQ.
If your operating system is not OS/2, please select
this item.
If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
Enables S.M.A.R.T hard disk support.
Invalidates this feature.
Video BIOS will be copied to RAM. Video Shadow
will increase the video speed.
Video shadow is disabled.
Optional ROM will be copied to RAM by 16K bytes
per unit.
The shadow function is disabled.
Sets the pre-delay time for hard disk to be
accessed by the system.
Enables the logo when system boots up.
Logo will not be shown when system boots up.
Does not allow you to upgrade the BIOS.
Note: Enabling this item can protect the
system BIOS from being attacked by
severe virus such as CIH. Therefore disable
this item only when wanting to flash BIOS,
afterwards set this item as Enabled (de-
fault).
Disabling this item allows you to upgrade the BIOS.
Manual for Advance 5/133E
Chapter 3
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Advance 5P6v693/a5

Table of Contents