Table of Contents
Advertisement
Chapter 2 Installing and Assembling the Hood
Installing the Hood
Match the stitching lines of the fabric hood to the corners of the
main body to install the hood.
If the hood is twisted, it cannot be installed properly.
Assembling the Hood and Frame
●Insert the tip of the support pole into the pole mounting hole (see
Fig. ①).
●Insert the other end of the support pole into the corner of the
frame
(See Fig. ②).
●Refer to Fig. ③ for the position of the other 3 poles and repeat the
above steps.
The support poles must be assembled crosswise.
●To remove a support pole, reverse the assembly steps.
Adjusting the Extension Rod
●Release the screw lock of the extension rod. Extend the length
of the rod as required and tighten the screw to fix it in place.
Extend the rod.
②
①
③
Tighten the screw to
lock the rod.
9
Advertisement
Table of Contents
