Table of Contents
Advertisement
8-19-11
Convert UPC-E1 to UPC-A (0x26)
When this parameter is set to "Enable", UPC-E1 decoded data shall be converted into UPC-A
format before transmission. In this case, transmission of UPC-A preamble characters and check
digits shall be done as separately specified.
When this parameter is set to "Disable", UPC-E1 decoded data shall not be converted into UPC-A
format and shall be transmitted as it is
Enable Conversion of UPC-E1 to UPC-A (0x01)
＊
Disable Conversion of UPC-E1 to UPC-A (0x00)
87
OPTICON
Software Guide
MDL-1000/2000
Advertisement
Table of Contents
