Fixing The Length Of Codabar (Nw7) (0X18/0X19) - Opticon MDL-1000 Software Manual

Laser scan engine with built in decoder
Table of Contents

Advertisement

8-25-2

Fixing the Length of Codabar (NW7) (0x18/0x19)

Length for Codabar (NW7) may be set for "Any Length", "One Discrete Length", "Two Discrete
Lengths", or "Length within a Range".
The length of a code refers to the number of characters including check digits that the code
contains.
Fixing to One Discrete Length:
This option limits decodes to only those Codabar (NW7) bar codes containing a selected length.
Length is selected from the numeric bar codes on page 108. For example, to decode only
Codabar (NW7) bar codes with 14 characters, scan "Codabar (NW7) – One Discrete Length"
and then scan numeric bar codes "1" followed by "4".
(Note: Single digit numbers must always be preceded by a leading zero.)
To change the selection or cancel an incorrect entry, scan "Cancel" bar code on page 108.
Fixing to Two Discrete Lengths:
This option limits decodes to only those Codabar (NW7) bar codes containing either of two
selected lengths. Lengths are selected from the numeric bar codes on page 108. For example,
to decode only those Codabar (NW7) bar codes containing either 2 or 14 characters, select
"Codabar (NW7) – Two Discrete Lengths". Then, scan numeric bar codes "0", "2", "1" and "4".
(Note: Single digit numbers must always be preceded by a leading zero.)
To change the selection or cancel an incorrect entry, scan "Cancel" bar code on page 108.
Fixing to Length within a Range:
This option limits decodes to only those Codabar (NW7) bar codes within a specified range. For
example, to decode Codabar (NW7) bar codes containing between 4 and 12 characters, first
scan "Codabar (NW7) – Length within a Range" and then scan numeric bar codes of "0", "4", "1"
and "2".
(Note: Single digit numbers must always be preceded by a leading zero.)
To change the selection or cancel an incorrect entry, scan "Cancel" bar code on page 108.
Fixing to Any Length:
Scan this option to decode Codabar (NW7) bar codes containing any number of characters.
Codabar (NW7) – One Discrete Length
Codabar (NW7) – Two Discrete Lengths
Codabar (NW7) – Length within a Range
Codabar (NW7) – Any Length
117
OPTICON
Software Guide
MDL-1000/2000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdl-2000

Table of Contents