Convert Upc-E To Upc-A (0X25) - Opticon MDL-1000 Software Manual

8-19-7

Convert UPC-E to UPC-A (0x25)

When setting this parameter to "Enable", UPC-E decoded data shall be converted into UPC-A
format before transmission. In this case, transmission of UPC-A preamble characters and check
digits shall be done as separately specified.
When setting this parameter to "Disable", UPC-E decoded data shall not be converted into UPC-A
format and shall be transmitted as it is.
Enable Conversion of UPC-E to UPC-A (0x01)
＊ Disable Conversion of UPC-E to UPC-A (0x00)
83
OPTICON
Software Guide
MDL-1000/2000