Host Serial Response Time-Out (0X9B) - Opticon MDL-1000 Software Manual

8-31-5

Host Serial Response Time-out (0x9B)

This parameter specifies how long the decoder waits for an ACK or NAK before resending.
The delay period can range from 0.0 to 9.9 seconds in 0.1 second increments. After scanning the
bar code below, scan 2 numeric bar codes on page 108.
To change the selection or cancel an incorrect entry, scan "Cancel" bar code on page 108.
(Default:2.0sec)
136
OPTICON
Software Guide
MDL-1000/2000