Honda Hondex HE-773-III-Di Operation Manual page 81

12. Lower Upper/Lower shaft slowly with holding the edge of the shaft. Make sure to
match the levels of the lower line and pipe clamp's upper edge. Face the bow mark to
bow direction. Lastly, tighten the knob to fix the shaft.
13. Fix the positioning clip.
Put the marking on knob-side clip so that it always faces toward knob direction. If it
faces the other way, sonar direction is 180deg opposite.
M6×12 pan head screw
M6 spring washer
Bow mark
Bow direction
Lower line
Match to the upper
edge of pipe clamp
Set the positing clip along with
the thread of pipe clamp
Knob
Draw the mark on Knob-side clip.
Keep the mark facing knob direction
when shifting the pipe.
76