3. HANDLING OF TRANSDUCER AND WATER TEMP SENSOR
Any works on the vessel are very unstable and risky.
Installation/maintenance of transducer and water temp sensor should be
handled after landing the vessel on ground or fixing the vessel at shipyard etc.
Water proof treatment is required for Thru-Hull installation.
If not, it causes the marine accident.
Do not operate the electronic tools with wet hands.
It causes electronic shock.
Do not remove the transducer plug when the power is ON.
It causes electronic shock.
4. HANDLING OF REMOE
Locate the remote to safe spot against vibration etc when not in use.
It may cause injury and accidents.
5. TFT LCD PANEL
TFT LCD panel is made with high precision technology. Therefore, the effective pixel is
over 99%, and pixel loss and continuous lighting pixel exist 0.01% or more. Please
understand this specifications.
3