Sweeping Step (Sonar/Bottom Sonar Modes); High Speed Scan Mode(Sonar Mode) - Honda Hondex HE-773-III-Di Operation Manual

SWEEPING STEP
Sweeping Step
Select the moving angle for the transducer.
1
Go to MENU1 – STEP.
S1~S6 : Fine steps for S1, but at slow speed compared to S6.
For some case, the selected step is not executed with sonar mode. Both selected
and activated steps are shown on the screen.

HIGH SPEED SCAN MODE(SONAR MODE)

[High Speed Scan Mode]
High speed mode is effective when the tilt is set to 90°(straight down to the
Sea bottom).
Set-up
Go to MENU 1 – 1.STEP. Select "S6F".
Vague image may be seen on the screen with High Speed Scan Mode.
(SONAR / BOTTOM SONAR MODES)
Selected step
Step
Sector
21
Actual step activated
Displayed as S6F