Handling Of Cable - Honda Hondex HE-773-III-Di Operation Manual

Do not install the unit where rain or spray dashes hit directly.
It causes firing and heating.
Do not install the unit at heated places.
It causes the firing from the increase of internal temperature, injury, and
electronic shock.
Use the earthing.
Noise influence can be prevented by firm earthing.
Away from direct sun light.
It causes the difficulty of future vision and heat problem.

2. HANDLING OF CABLE

Be sure to use the specified power supply cable.
It causes firing and heating.
Do not leave the power plug after its removal.
It causes firing and heating if the plug gets wet.
Be sure to wire the cables for safety pilot.
The improper wiring causes the accident.
Do not put the heavy object on cables or bend cables excessively.
Do not disassemble or modify the cables.
It causes firing, heating, or electronic shock.
Do not use damaged cables.
It causes firing or electronic shock.
Do not pull out the cable when disconnecting the plug.
The cable damage causes firing and electronics shock.
Be sure to hold and pull the plug itself for the removal.
Do not put any pressure on cables when installing the unit.
It causes line cut and shortage.
2