Transducer Set-Up - Honda Hondex HE-773-III-Di Operation Manual

TRANSDUCER SET-UP

TD Set-up
1
The following display appears for factory set-up and initialized condition. Press
SET button or
2
TD set-up
Select the frequency from 1. SELECT TD.
TD303 290kHz
TD304 140 240kHz
Scan_Port Set-up
Be sure to set-up "SCAN_PORT" every time changing the transducer.
To select hull unit
Select the hull unit to use.
Manual : Manual hull unit
Auto : Auto hull unit
lnitially, "Not selected" is shown.
You should set all items (SELECT TD,SCAN-PORT, HOIST SYSTEM)
Otherwise, the unit cannot be operated.
right direction button for set-up display.
Transducer is not selected.
Set Frequency.
<CAUTION>
Incorrect setting may damage
transducer and unit.
SET OR TO SELECT TD
13