Honda Hondex HE-773-III-Di Operation Manual page 77

4. Apply the adhesive bond for polyvinyl-chloride pipe onto the slid of pipe socket for one
rotation. Tighten the pipe socket and transducer.
(Proper level of clamping torque: 8~10kgf.m)
Tighten it enough to see no gap
in between.
5. Fix Upper/Lower shaft and transducer with pipe(tank) guide(A).
Round corner
M5 nut
M5×20 Pan head screw
M5 spring washer
Apply the bond for hard vinyl chloride
on to base of pipe socket before
tightening.
Pointed end
Insert the case fin
72
Pipe socket
Pipe guide(A)
Slide the case fin into pipe guide.
Then, fix it with M5 screw.
Bow mark
Case fin