Status | Faults; Figure 7-17. 'Status | Faults' Page - Comtech EF Data LBC-4000 Installation And Operation Manual

7.5.4.2

Status | Faults

Use this read-only page to review the current stored faults.
This page features a scrollable window that displays the unread stored faults log in sequential,
date-stamped format.
Fauts
Click [Refresh] to update screen.
Unread Stored Faults: ###
The section header displays the running tally of unread stored faults.
The event log displays the five oldest stored faults in the event log. The tally decrements as
events are transferred from the stored events log for display in this window.
The bottom of the section provides the following management functions:
•
Read Next Five Faults – Select this to display the next five unread stored faults in the
log.
•
Clear Fault Log – Select this to clear all stored faults from the log.
•
Initialize Faults Pointer – Select this to reset the internal pointer. This allows queries to
start at the beginning of the stored faults log.
Click [Submit] to update the changes.
Ethernet Interface Operation

Figure 7-17. 'Status | Faults' Page

7–24
LBC-4000 L-Band Up/Down Converter System
Revision 6
MN-LBC-4000