1.2.2 LBC-4000-ST System Application
The LBC-4000-ST is the "single converter only" version of the LBC-4000, but with a few
modifications:
•
Front panel mounted 70/140 MHz IF and L-band RF sample ports (nominal 20 dBc
coupling for either)
•
No integrated switching option
•
Rear panel power switch
•
Single power input and supply
•
Single hard mounted converter module (installed as CONV A) and is not field replaceable
Operation is the same as a standard LBC-4000 unit with a single module installed in the CONV A
location.
References to redundant switching, CONV B, and dual power supplies are not applicable.
Introduction
LBC-4000 L-Band Up/Down Converter System
1–3
Revision 6
MN-LBC-4000