Comtech EF Data LBC-4000 Installation And Operation Manual page 124

Command Arguments for
Parameter (Instruction
Type Code and
Qualifier)
Select Boot IMG_ 1 byte, numeric,
Image 1 or 2
Management IP IPA_ 18 bytes,
Address numeric
Gateway IP IPG_ 15 bytes,
Address numeric
Serial Interface Operation
Description of Arguments
Command or
(Note that all arguments are ASCII
Response to
numeric codes between 48 and 57)
Query
Command or Query.
Set or return the firmware image to boot from at startup.
Set or return in the form IMG_x where:
x=1 (Bulk Image 1) or
x=2 (Bulk Image 2)
Command or Query.
Set or return the Management IP Address for the '10/100
ETHERNET' port.
Set or return in the form IPA_aaa.bbb.ccc.ddd.yy where:
aaa.bbb.ccc.ddd=IP Address where:
aaa=0-223
bbb=0-255
ccc=0-255
ddd=0-255
yy=network prefix (08-30)
Command or Query.
Set or return the Gateway IP Address for the '10/100 ETHERNET'
port.
Set or return in the form IPG_aaa.bbb.ccc.ddd where:
aaa.bbb.ccc.ddd=IP Address where:
aaa=0-223
bbb=0-255
ccc=0-255
ddd=0-255
LBC-4000 L-Band Up/Down Converter System
8–14
Revision 6
Response to Query Response to
Command (Instruction Query
(Target to Code and (Target to
Controller) Qualifier) Controller)
IMG_ IMG_x
IMG_
IPA_ IPA_aaa.bbb.c
IPA_
cc.ddd.yy
IPG_
IPG_ IPG_aaa.bbb.
ccc.ddd
MN-LBC-4000