Woods Alitec CP40S Operator's Manual page 9

Skid steer cold planer single circuit valve
Table of Contents

Advertisement

SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
54519
WARNING
FALLING OFF CAN RESULT IN BEING RUN OVER.
Skid steer must have ROPS and seat belt/operator restraint.
Keep seat belt/operator restraint securely fastened.
Allow no riders.
RAISED EQUIPMENT CAN DROP AND CRUSH.
Never go underneath raised equipment or raised Skid Steer lift
arms, which can drop from hydraulic leak down, hydraulic
system failures, movement of control levers or mechanical
linkage failures.
Service work does not require going underneath equipment.
Read manual instructions.
FALLING OFF OR GOING UNDERNEATH EQUIPMENT
CAN RESULT IN SERIOUS INJURY OR DEATH.
MCP40S/C (Rev. 4/20/2007)
Replace Immediately If Damaged!
54519--A
BE CAREFUL!
Use a clean, damp cloth to clean safety
decals.
Avoid spraying too close to decals when
using a pressure washer; high-pressure
water can enter through very small
scratches or under edges of decals causing
them to peel or come off.
Replacement safety decals can be ordered
free from your Woods dealer. To locate your
nearest dealer, check the Dealer Locator at
www.WoodsEquipment.com, or in the
United States and Canada call
1-800-319-6637.
Safety 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alitec cp40c

Table of Contents