1. Manuals
  2. Brands
  3. Woods Manuals
  4. Farm Equipment
  5. 111753
  6. Manual

Woods 111753 Manual

Loader mounting kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

111753 LOADER MOUNTING KIT
Loaders:
1009
1012
1016
Includes:
Hose Kit
59732
PN - 59744 (12/14/01)
John Deere Models:
4500, 4600, 4700
MANUAL
PART NUMBER
59744
mounting to

Advertisement

Table of Contents
loading

Related Manuals for Woods 111753

Summary of Contents for Woods 111753

  • Page 1 111753 LOADER MOUNTING KIT Loaders: 1009 1012 mounting to 1016 John Deere Models: 4500, 4600, 4700 Includes: Hose Kit 59732 MANUAL PART NUMBER 59744 PN - 59744 (12/14/01)
  • Page 2 TO THE OWNER: Read this manual before operating your WOODS equipment. The information presented will prepare you to do a better and safer job. Keep this manual handy for ready reference. Require all operators to read this manual carefully and become acquainted with all the adjustment and operating procedures before attempting to operate.

  • Page 3: Safety Rules

    SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! „ Know your controls and how to stop engine and Safety is a primary concern in the design and attachment quickly in an emergency. manufacture of our products. Unfortunately, our „ Keep hands and body away from pressurized efforts to provide safe equipment can be wiped out lines.

  • Page 4: Operation

    SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! „ Before dismounting power unit or performing (Safety Rules continued from previous page) „ Do not connect a low-pressure hydraulic hose any service or maintenance, follow these steps: disengage power to equipment, lower the 3-point into a high-pressure system—it will burst the hose.
  • Page 5 SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! „ Keep all persons away from operator control „ Make sure shields and guards are properly area while performing adjustments, service, or installed and in good condition. Replace if dam- maintenance. aged.

  • Page 6: Safety And Instructional Decals

    SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! MODEL NO. SERIAL NO. MASS (KG) ID NO. YR OF MFG. OREGON, IL U.S.A. 4 - SERIAL NUMBER PLATE 2 - PN 56053 Loader Mount (Left Side) DANGER Optional Loader...

  • Page 7: Crushing Hazard

    SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! (Safety Decals continued from previous page) LOADER MOUNTING INSTRUCTIONS Read Operator’s Manual instructions before proceding. 6 - PN 56050 To Remove Loader 1. Park tractor on level surface with bucket flat on WARNING WARNING ground.

  • Page 8: Tractor Preparation

    WARNING CAUTION „ If you do not understand any part of this man- Only use #111753 Loader Mounting Kit for ual and need assistance, see your dealer. mounting Woods 1009/1012/1016 loaders on John „ Always wear relatively tight and belted cloth- Deere 4500, 4600, and 4700 tractors.
  • Page 9 LOADER MOUNT INSTALLATION Cont’d Install Loader Mounts 1. Remove two cap screws and spacers securing quick coupler bracket to right side of tractor housing as shown in Figure 1. Remove Hardware from Bracket Figure 1 Remove Hardware From Quick Coupler Bracket 2.
  • Page 10 CD5522-1 #59698 #59738 Left Front Mount Grill Guard Figure 3 #111753 Loader Mounting Kit Install Front Mounts 1. Install right front mount (4) to front of tractor using four cap screws (13), flat washers (11), and hex nuts (12). 2. Position cap screw on the outside of mount as shown in Figure 4 with flat washers and hex nuts on the inside of tractor frame.
  • Page 11 LOADER MOUNT INSTALLATION Cont’d Install Side Rails Refer to Figure 5 and Figure 6 1. Attach front end of left side rail (3) to outside of front mounts (5). 2. Secure with two carriage bolts (17), flat washers (14), and hex nuts (16). 3.
  • Page 12 LOADER MOUNT INSTALLATION Cont’d Install Grill Guard Kit Attach grill guard (6) to right and left front mounts using four cap screws (18), eight hardened flat wash- ers (15), and hex nuts (16). 59738 Grill Guard 57817 5/8 Hardened flat washer 230 5/8 NC Hex nut CD5522-3 4548 5/8 NC x 1-3/4 Cap screw GR5...
  • Page 13 CONTROL VALVE & HOSE KIT INSTALLATION WARNING WARNING „ Make sure all hydraulic hoses, fittings, and „ Keep hands and body away from pressurized valves are in good condition and not leaking lines. Use paper or cardboard, not hands or other before starting power unit or using equipment.
  • Page 14 #59732 Hose Kit (For use with tractor remote) Install Hose Kit These set-up instructions are for operating the loader using the tractor hydraulic remote control lever. To use this hydraulic connection the tractor must be equipped with multi-function hydraulic lever and four tractor hydraulic couplers as shown in Figure 8.
  • Page 15 #59732 Hose Kit Cont’d Assemble Hoses 1. Attach 90 degree elbow (2) and male quick cou- 40488 46” Hose, 3/8 x 8JICM x 8JICF pler (3) (not supplied in kit) to three loader supply 2. 313030 90° Elbow, 8JICM x 3/8 NPTM hoses (1).
  • Page 16 #59732 Hose Kit Cont’d 2 2 1 Verification of Control Movements /(9(5 )/2$7 326,7,21 1. Comply with all Safety Rules and start the tractor. &21752/ 2. Mount loader to tractor by activating bucket cylin- ders to raise or lower the loader side rails into the /2:(5 '803 75$&725...
  • Page 17 4500, 4600,4700 #111753 LOADER MOUNT KIT ......16 #59732 HOSE KIT .........17...
  • Page 18 #111753 LOADER MOUNTING KIT CD5522 PART DESCRIPTION PART DESCRIPTION 59695 Right rear mount 24576 1/2 NC x 1-3/4 Cap screw GR5 59696 Left rear mount 58337 18 5/8 Hardened flat washer, extra thick 58336 Front side rail 57817 5/8 Hardened flat washer...
  • Page 19 59732 HOSE KIT CD5988 PART DESCRIPTION 40488 3/8 x 46" hose with protective sleeves clamped at both ends 3/4JICM x 3/4JIC 313030 90° Elbow, 3/4JICM x 3/8NPTM 3/8 male hydraulic coupler x 3/8 NPTF (not included in kit, obtain from John Deere dealer 315039 Swivel pipe adapter, male to female...

  • Page 20: Bolt Torque Chart

    BOLT TORQUE CHART Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual parts list. Always use the proper tool for tightening hardware: SAE for SAE hardware and Metric for metric hardware. Make sure fastener threads are clean and you start thread engagement properly.

  • Page 21: Bolt Size Chart

    BOLT SIZE CHART NOTE: Chart shows bolt thread sizes and corresponding head (wrench) sizes for standard SAE and metric bolts. SAE Bolt Thread Sizes 5/16 Metric Bolt Thread Sizes 10MM 12MM 14MM 16MM 18MM ABBREVIATIONS AG ............Agriculture NC ............National Coarse ATF ......Automatic Transmission Fluid NF ............

  • Page 22: Warranty

    WOODS’ obligation under this Warranty is limited to, at WOODS’ option, the repair or replacement, free of charge, of the product if WOODS, in its sole discretion, deems it to be defective or in noncompliance with this Warranty. The product must be returned to WOODS with proof of purchase within thirty...
  • Page 23 Under no circumstances will this Warranty apply in the event that the product, in the good faith opinion of WOODS, has been subjected to improper operation, improper maintenance, misuse, or an accident. This Warranty does not apply in the event that the product has been materially modified or repaired by someone other than WOODS, a WOODS authorized dealer or distrib- utor, and/or a WOODS authorized service center.
  • Page 24 PART NO. 59744 Woods Equipment Company 2606 Illinois Route 2 South Post Office Box 1000 Oregon, Illinois 61061 815-732-2141 tel 815-732-7580 fax © 1999 Woods Equipment Company. All rights reserved.

Table of Contents