Table of Contents
Advertisement
The purpose of this manual is to assist you in operating
and maintaining your planer. Read it carefully. It fur-
nishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature due to unknown and varying
operating conditions. However, through experience and
these instructions, you should be able to develop proce-
dures suitable to your particular situation.
PLANING WIDTH
PLANING DEPTH
HYDRAULIC HORSEPOWER REQUIRED
SIDESHIFT CAPABILITY
NUMBER OF CARBIDE PICKS
TILT CAPABILITY
HYDRAULIC FLOW REQUIRED
HYDRAULIC PRESSURE REQUIRED
OPERATING WEIGHT
PLANETARY GEARBOX CAPACITY
PLANETARY LUBRICANT
4 Introduction
GENERAL INFORMATION
SPECIFICATIONS
The illustrations and data used in this manual were cur-
rent at the time of printing but, due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the equipment facing the direction of forward
travel.
CP40S/C
40 inches
0-10 inches
30-60 hp
22 inches
87
±10°
25-40 gpm
2000-5000 psi
2600 lbs
19 oz
80W-90 GL5 Gear Lube
MCP40S/C (Rev. 4/20/2007)
Advertisement
Table of Contents
