European Communities (Ec) Directive Compliance - Rockwell Automation Allen-Bradley ControlLogix 1756-MVI Installation Instructions Manual

European Communities (EC) Directive Compliance

If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and
tested to meet the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) by applying the following
standards, in whole or in part, documented in a technical
construction file:
EN 50081-2 EMC — Generic Emission Standard, Part 2 —
•
Industrial Environment
EN 50082-2 EMC — Generic Immunity Standard, Part 2 —
•
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 61131-2
Programmable Controllers, Part 2 - Equipment Requirements and
Tests. For specific information required by EN 61131-2, see the
appropriate sections in this publication, as well as the Allen-Bradley
publication Industrial Automation Wiring and Grounding Guidelines
For Noise Immunity, publication 1770-4.1.
This equipment is classified as open equipment and must be
mounted in an enclosure during operation to provide safety
protection.
ControlLogix Multi-Vendor Interface Module
Publication 1756-IN001A-US-P - May 2000
3