To Operate Demist System; To Operate Browvents; To Operate Mouthvent; To Operate Top Vents - Arai QUANTUM-X Operation Instructions Manual

TO OPERATE DEMIST SYSTEM

A demist function is incorporated in the shield
latch system to allow more rapid clearing of
any interior mist with the shield remaining
partially latched. Push the shield latch lever
up to release shield into the demist position to
assist moisture dispersal.
To close the shield completely, push the
shield down until the latch post fully engages
the shield and latch lever captures the bottom
of the shield.

TO OPERATE BROWVENTS

The Browvents are operated from fully
closed through intermediate, to fully open
positions by simply pulling the vent control
down to open, pushing up to close.
4

TO OPERATE MOUTHVENT

The Monthvent is operated by simply pulling the vent control down to open,
pushing up to close.
When the vent control is fully open, air is
directed up along the interior surface of the
shield to help prevent fogging.
When it is in its mid-way position air is
channeled back to further enhance the
airflow around the month and nose to help
move hot moist air out faster.

TO OPERATE TOP VENTS

Simply push the switches/levers on each vent to open/close the vents.
NOTE:
Do not use oils or waxes to lubricate vents or other moving parts.
If you must lubricate such components, sparingly use the silicone lubricant
supplied with your helmet for eyeport trim dressing.
OPEN
OPEN
CLOSE
CLOSE