Xoro HRS 8670 LAN Operating Instructions Manual page 38

In the "ConnectionType" line, select how the receiver will be connected to the network
IPsettings (Only available for connection type
"LAN" ) Normally,
necessary IP settings from your router. Most
customers do not need and should not make
any settings.
If you have switched off the DHCP function on
your Routers, you must change the IP
Manually configure settings. Change "Obtain
IP automatically - DHCP" to "and enter IP
address, subnet mask, DNS Server and default gateway by hand.
Note:IP settings should only be performed by users who are familiar with basics of network
technology.
of 38
settings
the receiver gets all