Table of Contents
Advertisement
Antenna and search - preparation
Preparation:
In order to successfully perform a channel search, you need to
your receiving system:
•
Which satellite is their antenna aimed at? UK Freesat is at 28.2east
•
If you have multiple antennas or an antenna with several LNB you need to know what
kind of
switcher (Toneburst
antenna/LNB is connected.
•
With a UniCable/SCR EN50494 receiving system, you need to know which user band is
available and which band frequency is associated with it.
Check with the installer of your antenna system if you do not
Example:
Most satellite antennas in Ireland are oriented towards
"Universal" or "Digital" LNB. In these cases, we recommend you do a full auto scan on Astra
28.2east.
If you do not want to use the pre-programmed transmitter list, the usual settings for ASTRA 28.2°
receivers are the following:
Satellite:
LNB-Type:
LNB Voltage:
22KHz:
Toneburst:
of 18
Initial
or
DiSEqC)you are using
028.2E Ku_ASTRA2
09750/10600
13/18V
auto
no
know some information about
and to
which
know some parameters.
the ASTRA 28.2° satellite and have a
port
which
Advertisement
Table of Contents
