Initial Operation; Cable Retainer; Preparing Eggs - Silvercrest SED 400 A1 Operating Instructions Manual

Initial operation

Before starting to use the appliance, ensure that . . .
– the appliance, power plug and mains cable
and...
– all packaging materials have been removed from the appliance .
1) Clean all parts of the appliance as described in the section entitled "Cleaning
and care" .
2) Unwind the cable from around the cable retainer
recess on the edge .
3) Insert the plug into a suitable mains power socket .
The appliance is now ready for use .

Cable retainer

There is a cable retainer
you to adjust the length of the cable to your requirements .
CAUTION – PROPERTY DAMAGE!
► Ensure that you always guide the cable through the corresponding gap in
the rear of the appliance base
NOTE
► Always wrap the power cable around the cable retainer
direction . This reduces the length of the cable to a minimum, allowing you
to guide the cable through the gap in the appliance base

Preparing eggs

1) Pick a hole in the bottom of the egg with the egg pick
inside the egg to dissipate as it expands during boiling . It prevents the shell
from bursting open .
2) Place up to 7 eggs on the cooking insert
3) Fill the measuring cup
water into the cooking bowl
4) Place the cooking insert
■ 24
│ GB│IE
on the base of the appliance . This retainer allows
for the sake of stability .
with the picked side up .
up to the MAX marking with tap water and tip this
.
into the cooking bowl
are in perfect condition
and guide it through the
in a clockwise
.
. This allows the air
and place the lid on top .
SED 400 A1