Ordering Information; Electrical Specifications - Delta DPA Series Instruction Sheet

 Ordering Information
Series name
1 2
Measurable pressure range
3
Output types
4
Pressure pore types
 Electrical Specifications
Voltage range
Power supply
Power consumption
Pressure type
Measurable range
Pressure
measurement
Max. durable pressure
Accuracy
Temperature inaccuracy
Setup display
Status display
Display
Display mode
Cycle
Number of outputs
Transistor output
Output
Analog output
Response time
Output inaccuracy
P
Pore size N
G
Shock immunity
Vibration immunity
Ambient temperature
Storage temperature
Altitude
Ambient humidity
DPA: Delta DPA series pressure sensor
01: -100kPa ~ 100kPa
10: -100kPa ~ 1,000kPa
N: NPN output + 4 ~ 20mA; P: PNP output + 4 ~ 20mA
M: NPN output + 1 ~ 5V; Q: PNP output + 1 ~ 5V
P: Outer pore PT 1/8, inner pore M5
N: Outer pore NPT 1/8, inner pore M5
G: Outer pore G 1/8, inner pore M5
12 ~ 24V DC +/- 10% no isolation
40mA Max.; current output type 60mA Max.
Non-corrosive gas, gauge type
DPA01: -100kPa ~ 100kPa
DPA10: -100kPa ~ 1,000kPa
DPA01: 200kPa
DPA10: 1,500kPa
+/- 3% entire process
+/- 2% entire process
2-line LCD display, 4 digits for measured value and 3.5 digits for setup display
LCD output status display
3 colors for different modes
100ms, 250ms, 500ms, 1,000ms
Built-in 2 NPN or PNP transistor digital outputs and 1 analog output
NPN: Max. durable pressure 30V/100mA, residual voltage 1.5V
PNP: Max. durable pressure 30V/100mA, residual voltage 1.5V
1 ~ 5V: Min. output load resistance 1,000Ω
4 ~ 20mA: Max. output load resistance 400Ω; linear inaccuracy < 2% entire process
2ms, 4ms, 10ms, 30ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms
Linear inaccuracy: < +/- 2% entire process
Outer pore PT 1/8, inner pore M5
Outer pore NPT 1/8, inner pore M5
Outer pore G 1/8, inner pore M5
10 ~ 500Hz, 10mm 3 axes for 2 hours
2
Max. 100m/ s 3 axes 6 directions, 3 times each
0°C ~ +50°C
-20°C ~ +65°C
< 2,000m
35% ~ 80% RH (non-condensing)
- 2 -