Download
Share
Print this page
Delta BIESEMEYER 78-955 Instruction Manual
  1. Manuals
  2. Brands
  3. Delta Manuals
  4. Accessories
  5. BIESEMEYER 78-955
  6. Instruction manual

Delta BIESEMEYER 78-955 Instruction Manual

10” table saw blade guard systems
Hide thumbs

Advertisement

Quick Links

Download this manual
(MODEL 78-955 FOR 28", 30" AND 40" T-SQUARE
(MODEL 78-960 FOR 50" AND 52" T-SQUARE
To learn more about DELTA MACHINERY visit our web
site at: www.deltaportercable.com. For Parts, Service,
Warranty or other assistance, please call 1-800-223-7278
10" TABLE SAW BLADE GUARD SYSTEMS
To learn more about BIESEMEYER MANUFACTURING
visit our web site at: www.biesemeyer.com. For Parts,
Service, Warranty or other assistance, please call
1-800-782-1831
BIESEMEYER
®
®
FENCES)
®
FENCES)
PART NO. 1350436
DATED 06-15-2006

Advertisement

loading

Related Manuals for Delta BIESEMEYER 78-955

Summary of Contents for Delta BIESEMEYER 78-955

  • Page 1 (MODEL 78-955 FOR 28”, 30” AND 40” T-SQUARE (MODEL 78-960 FOR 50” AND 52” T-SQUARE To learn more about DELTA MACHINERY visit our web site at: www.deltaportercable.com. For Parts, Service, Warranty or other assistance, please call 1-800-223-7278 10” TABLE SAW BLADE GUARD SYSTEMS To learn more about BIESEMEYER MANUFACTURING visit our web site at: www.biesemeyer.com.

  • Page 2: Safety Rules

    IESEMEYER OSHA regulations and ANSI standards require that a splitter and anti-kickback device be utilized for through cutting operations. The 78-955 and 78-960 comply with these regulations. 1. FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BEFORE OPERATING THE BLADE GUARD SYSTEM.
  • Page 3 Carefully unpack the blade guard and all loose items from the carton. Figures 1 and 2 illustrate all items supplied with the Blade Guard System. 1 - Blade Guard Basket Assembly 2 - Basket Body Assembly 3 - Guard Mounting Base 4 - T-Arm 5 - Splitter Assembly (Contents shown in Fig.

  • Page 4: Installation

    Delta 10” left-tilting arbor Unisaw. Assembly to a right-tilting arbor saw will be opposite to what is shown except where noted. 1. Locate the components shown in Fig. 2, for the splitter assembly.
  • Page 5 Left tilting Arbor Unisaw. NOTE: Just snug up button head screws at this time. 9. Using a straight edge (R) Fig. 10, align the top portion of splitter mounting bracket (P) to saw arbor (S) as shown. Then tighten two screws (N) Fig. 9. Fig. 7 Fig.
  • Page 6 10. Insert index pin (T) Fig. 11, through the hole in splitter (U), as shown, and fasten with locknut (V). Fig 11 illustrates the index pin assembly arrangement for both right and left tilting arbor saws. RIGHT-TILT LEFT-TILT Fig. 11 11.
  • Page 7 14. Fasten the mounting bracket (A) Fig. 15, to the back rail (B) using the three 2-3/4” long hex head screws (F), three 3-3/4” long hex head screws (G), twelve 1/4” flat washers and six 1/4-20 hex nuts. Place one flat washer on each hex head screw before inserting through the guard mount bracket.
  • Page 8 “T” of the adjusting arm (J). 20. Loosen the two locking knobs (R) & (H) Fig. 21, and adjust T-arm (J) and blade guard basket assembly (N) until the guard basket (M) is centered over the saw blade. Fig. 19 Fig. 20...
  • Page 9 (H) Fig. 21. Fig. 22 22. To raise the guard basket (M) Fig. 23, above the saw blade, simply lift up the hood by the dust port until guard catch (T) engages hex head bolt (U) as shown in Fig 24. It may be necessary to loosen hex head bolt (U) to allow the guard catch (T) to fall back to engage bolt (U).
  • Page 10 24. There is an adjustment screw to achieve the desired weight of the guard basket (M) Fig. 27, on the workpiece. To make an adjustment, loosen locknut (V) Fig. 26, and turn wing nut (W) clockwise to decrease the pressure or counter-clockwise to increase the pressure.
  • Page 11 NOTICE: BEFORE MAKING ANY ADJUSTMENTS TO THE GUARD BASKET ASSEMBLY, DISCONNECT THE SAW FROM THE POWER SOURCE AND MAKE CERTAIN THE SAW BLADE HAS STOPPED TURNING COMPLETELY! 26. Left to right movement of the blade guard basket (M) Fig. 28, is obtained by loosening locking knob (H) and sliding the T-Arm (J) to the left or right.

  • Page 12: Two Year Limited Warranty

    TWO YEAR LIMITED WARRANTY Delta will replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer notifies his supplying distributor of the alleged defect within two years from the date of delivery to him, of the product and provides Delta Machinery with reasonable opportunity to verify the defect by inspection.

This manual is also suitable for:

Biesemeyer 78-960