Factory Intonation; Stops; Couplers - Johannus SWEELINCK 17 User Manual

4.4

Factory intonation

Save the intonation settings
1. Connect a PC to the organ. Use the MIDI SEQ. output, see § 3.7.
2. Save the intonation settings on the PC using the intonation programme
of Johannus.
Restore the factory intonation
1. Switch off the organ.
2. Press pistons 1 and 8. Hold the pistons.
3. Switch on the organ.
4. Wait until the lamp in the 0-piston lights up.
5. Release pistons 1 and 8.
4.5

Stops

The stops are activated by means of rocker switches or through the capture
memory. See § 4.11.1. The lamp in the rocker switch is lit when the
associated stop is active.
The stops have been divided into four main groups:
Pedalboard: Activates the stops associated with the pedalboard.
Great: Activates the stops associated with the Great.
Swell: Activates the stops associated with the Swell.
Choir: Activates the stops associated with the Choir (only with an organ
that has three keyboards).
4.6

Couplers

Manual coupler: Fully couples all keys of the Swell to the Great.
Activates the manual coupler through the stops Swell – Great, Choir –
Great or Swell – Choir (only with an organ that has three keyboards).
Pedal coupler: Fully couples all keys of the Great or the Swell to the
pedal. Activate a pedal coupler through the stop Great - Pedal or Swell
- Pedal or Choir - Pedal (only with an organ that has three keyboards).
In order to save the intonation settings, you need the Johannus
intonation programme.
The current intonation settings will be lost if the settings are not
saved on a PC.
15