Using The Watch In A Medical Facility Or Aircraft; Using Mobile Link With A Mobile Phone; Getting Ready - Casio 5641 Operation Manual

4.
Configure the date and time settings.
While the seconds are flashing,
●
pressing (E) will reset them to 00. 1 is
added to the minutes when the current
seconds count is between 30 and 59
seconds.
To configure settings other than the
●
seconds, use (E) and (B).
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) twice to complete the setting
operation.
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when [SET] stops
flashing.
3.
Press (D) three times so [12H] or [24H] is
flashing on the display.
4.
Press (E) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
5.
Press (A) twice to complete the setting
operation.
Note
While 12-hour timekeeping is
●
selected, [P] will be displayed for p.m.
times.
Watch Operation Guide 5641
Using the Watch in a Medical
Facility or Aircraft
When you are in a hospital, on an aircraft, or
in any other location where radio signals may
cause problems, you can perform the
procedure below to disconnect the watch from
your phone so they can't communicate with
each other (Airplane Mode). Use the same
procedure when you want to disable the
Airplane Mode.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when [SET] stops
flashing.
3.
Press (D) eight times.
This displays the Airplane Mode icon.
4.
Press (E) to change the Airplane Mode
setting.
[On]: Airplane Mode enabled.
[OFF]: Airplane Mode disabled.
5.
Press (A) twice to complete the setting
operation.
Airplane Mode icon
Using Mobile Link
with a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while G-
●
SHOCK MOVE is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y

Getting Ready

To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the app on your phone.
● A
In Google Play or the App Store, search for the
CASIO "G-SHOCK MOVE" app and install it
on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
7