Configuring World Time City Settings; Adjusting Hand Alignment; Enabling Phone Notification Receipt; Phone Finder - Casio 5641 Operation Manual

Configuring World Time City
Settings
Specifying a World Time City with G-SHOCK
MOVE causes the watch's World Time City to
change accordingly. Settings can be
configured to perform auto summer time
switching for the World Time City.
Check the connection
Make sure that the symbol is shown on
e
●
the watch display when you perform the
procedure below. If is not displayed,
e
refer to the information at the link below.
Connecting with a Phone
l
Note
G-SHOCK MOVE World Time lets you
●
select from among approximately 300
cities as the World Time City.
Selecting a World Time City
●
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Note
You can use G-SHOCK MOVE to
●
configure settings for user cities that
are not included in the watch's built-in
World Time Cities. You must use G-
SHOCK MOVE to select a user city as
your World Time City.
Watch Operation Guide 5641
Configuring the Summer Time Setting
●
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
G-SHOCK MOVE screen shows
●
information about summer time
periods.

Adjusting Hand Alignment

If the hands are out of alignment even though
the watch is connected with your phone, use
G-SHOCK MOVE to adjust them.
Check the connection
Make sure that the
●
the watch display when you perform the
procedure below. If
refer to the information at the link below.
Connecting with a Phone
l
1. Y
Tap the "G-SHOCK MOVE" icon.
2. Y
On the menu bar, tap "More".
3. Y
Tap "Watch".
4. Y
Select your preferred watch.
5. Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Use G-SHOCK MOVE to configure settings to
have phone notifications (incoming calls, mail,
social networking sites, etc.) received by the
watch.
1. Y
2. Y
3. Y
4. Y
5. Y
You can use phone finder to trigger a tone on
the paired phone to help you find it. The tone
is forced to sound even if your phone is in
vibrate mode.
symbol is shown on
e
is not displayed,
e
Enabling Phone Notification
Receipt
Important!
Note that you cannot configure this
●
setting using watch operations. Use G-
SHOCK MOVE to configure settings.
Check the connection
Make sure that the symbol is shown on
e
●
the watch display when you perform the
procedure below. If is not displayed,
e
refer to the information at the link below.
Connecting with a Phone
l
Tap the "G-SHOCK MOVE" icon.
On the menu bar, tap "More".
Tap "Watch".
Select your preferred watch.
Select the setting you want to change
and then perform the operation shown on
the screen.

Phone Finder

Important!
Phone finder will not sound the tone
●
unless G-SHOCK MOVE is running on
the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
10