Measuring Elapsed Time - Casio 5641 Operation Manual

Stopwatch
The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 24 hours.
In addition to normal elapsed time
measurements, the stopwatch also lets you
take split time and lap time readings.
You can also measure distance and pace.
Note
If a measurement operation continues
●
for 36 hours, it will stop automatically
and [F] will flash on the display.
Whenever you record a lap or split
●
time, the watch creates a record. The
record include the following
information: Measurement start date
and time, the time and pace of each lap
or split, and the total distance and total
calories burned.
Up to 45 split time and lap time records
●
can be stored in watch memory.
Performing a lap or split time operation
while there are already 45 records in
memory will cause the oldest record to
be deleted automatically to make room
for the new one.
You can use the Recall Mode to view
●
the latest measurement data.
Viewing Data Records
l
You can use G-SHOCK MOVE to view
●
past measurement data.
If the watch is connected with your
●
phone, ending a measurement
operation and performing a reset will
cause the measured log data to be
sent automatically to G-SHOCK
MOVE.
You will not be able to start the next
measurement operation until the
transfer is complete.
You cannot use G-SHOCK MOVE
●
operations to refresh or send all
settings while a Stopwatch Mode
measurement operation is in progress.
Watch Operation Guide 5641
Split Times and Lap Times
Split time
●
A split time is the time elapsed from the start,
up to any point along the course of an event.
Lap time
●
A lap time shows the time elapsed during a
specific lap around a track, etc.
E
Start
Split 1
A
Split 2
A
Split 3
E
Goal
E
Start
Lap 1
A
Lap 2
A
Lap 3
E
Goal

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
E
Start
E
Stop
E
Resume
E
Stop
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour After first hour
Seconds
Hours, minutes
1/100 seconds
Minutes
Stopwatch number
Stopwatch number
3.
Press (A) to reset the stopwatch to all
zeros.
Seconds
15