EcoDim Eco-Dim.10 Zigbee User Manual page 8

2). Inclusion to a Zigbee Network
Step 1. Remove the device from the previous Zigbee network in case it
has been added to, otherwise pairing mode will fail.
Step 3. The indicator
will start blinking blue
and stay solid for 10S
when pairing
succeded. Timeout
15mins.
3). Remove from a Zigbee Network
Method 1. Choose delete or reset as instructed from your Z-Wave hub
interface
Method 2. Remove from the Device, see below instructions.
Step 2. The indicator
will start blinking
purple and stay solid
for 10s when the
removal is done. Time
out 3 mins.
Trailing Edge
Trailing Edge
Step 2. Double
Press the reset
button.
Step 1. Press the
reset button for 3
times.
5