Baumatic BF13 Instruction Manual page 9

Residual heat indicator
As long as the temperature of the burner remains high enough to cause
injury, the display corresponding to the burner shows the "H" symbol
(residual heat). This indication only disappears when there is no
longer any danger (at 60°C).
The display shows a "0" as long as the temperature remains below
60°C, whereas it shows an "H" whenever the temperature exceeds
60°C.
To save energy, turn off the burner in advance, in order to exploit the residual heat.
The residual heat indicator "H" is lost in the event of a mains
power cut lasting more than 3 seconds.
Turning off the cook top
The cook top can be turned off at any time by means of the on/off key (1).
3. Dual-circuit burners (BF14.1-BF15 only)
Two burners can be equipped with a second circuit: for instance, the burner is composed of a central
disk and an outer ring. You can turn on both elements (fig. 5) or the central disk alone (fig. 4). This
enables you to adapt the heated area to the size of the saucepan you are using.
Turning off the burner's second circuit
1.Select the required power setting (from 1 to 9) with the keys "+" e "-" (5/4).
When turn on the plate with double cooking zone, the dual circuit key pilot light (7)
relating to the burner concerned comes on; the second circuit comes on together
with the first.
It is possible to turn off the second circuit by pressing the dual-circuit key (6).
Touch the dual-circuit key (6).
The pilot light (7) goes off and the second circuit on burner also goes off.
3. Protection against unintended switching-ON
If the electronic control realizes a continuous operation of keys for approx. 10 seconds, it switches OFF automatically. The
control sends out an audible failure signal for 10 seconds, so that the user can remove the object which has been mistakingly
placed onto the operation surface. The displays show the failure code " E R 0 3 " . If the failure carries on for more than 10
seconds, only the code " E R 0 3 " will be displayed as long as the failure will be recognized by the electronic control. If the
cooking zone is in the "hot" status, "H" will appear on the display in alteration with the failure notice.
If no cooking zone will be activated within 20 seconds after switching-ON by means of the Power-key, the control switches
back from the ON-condition into the stand-by-mode.
When the control is switched-ON the ON/OFF-key has priority over all other keys, so that the control can be switched-OFF
anytime, even in case of multiple or continous operation of keys.
In the stand-by mode a continous operation will not be signalized. However, before the electronic control can be switched-ON
again, it has to recognize that all keys are not operated.
4. Locking the cook top functions
After switching-ON the control the child safety feature can be activated. To achieve this it is necessary to simultaneously
operate the front right cooking-zone-select-key (2-5) and the MINUS-key(4) and then press the front right cooking-zone-
select-key (2-5) again. There will be an "L" , meaning LOCKED (child safety feature against unintended switching-ON). If a
cooking zone is in the "hot" condition, "L" and "H" will be displayed in alternation.
8