Description Of The Controls; Touch Controls; Turning On And Off; Instructions For Use - Baumatic BF13 Instruction Manual

INSTRUCTIONS FOR USE

Important: Before cooking with the appliance for the first time, it is important to clean the cook top. Then turn on all the
heating elements, one as a time, with no pan on top, for 5 minutes on the maximum temperature setting. This will eliminate to
the "new smell" and make any humidity that had accumulated on the heating elements evaporate. This is also essential to
ensure that the electronic devices function properly.
CERAMIC GLASS COOK TOP WITH TOUCH CONTROLS

1. Description of the controls

1. On/off key (ON/OFF)
2. Burner element key (ON/OFF)
3. Setting display (residual heat)
4. "Less" key
5. "More" key
6. Dual-circuit key (ON/OFF) (BF14.1-BF15 only)
7. Dual-circuit pilot light (BF14.1-BF15 only)
8. Decimal point on setting display
On: the burner setting can be adjusted
Off: the burner is disabled.

Touch controls

All operations are performed by means of touch controls (capacitive sensors) situated on the front of the cook top; there is a
display relating to each key.
Every action is confirmed by an acoustic signal.

2. Turning on and off

1. Touch the on/off button.(1)
The control is enabled: the setting level indicators (3) read "0"
and the decimal points (8) flash on and off.
The next step must be carried out within 20 seconds, otherwise
the appliance goes off automatically.
Turning on the burner
If the control is ON the respective cooking zone can be selected by
operating a cooking-zone-select-key (= PLUS-key(5-2) of the
respective cooking zone). There is a static dot indication (8)in the
respective display. If the cooking zone is hot "0" is displayed instead
of "H" . On all other cooking zone displays(3) the blinking dot
extinguishes. Then a setting will be chosen by a renewed operation of
the cooking- zone-select-key or the MINUS-key and the cooking zone
begins to heat up. In order to use the cooking-zone-select-key as a
PLUS-key the control has to recognize that after the selection the
cooking zone has been released for 0,3 seconds.
After selection of a cooking zone the setting can be increased by continously pressing the PLUS-key, starting at step "1" it is
increased by 1 step every 0,4 seconds. When setting "9" is reached the setting will not be changed further (end stop).
If the selected cooking zone will be switched ON by means of the MINUS key(4), the cooking zone starts at the maximum
setting "9" ("reverse switching-ON"). When the key is continuously operated, it decreases by 1 step every 0,4 seconds. When
setting "0" is reached, there will be no further setting changed (end stop). Only a renewed operation of the MINUS (or PLUS)
key changes the setting.
Turning off the burner
/Turning off the burner instantly:
To switch off an individual cooking zone, the respective cooking zone has to be selected with the cooking-zone-select-key (=
PLUS). The selection is indicated with the static dot in the respective cooking zone display. If the control recognizes that the
PLUS- (cooking-zone-select-key is the PLUS-key) and the MINUS-key have been activated simultaneously the setting of the
selected cooking zone will be put back to "0". Alternatively, the MINUS-key can be used to count down the setting to "0".
If all cooking zones are at "0", all decimal points in the cooking zone displays are blinking. If a cooking zone is "hot", "H" will
be displayed instead of "0".
7
.