Technical Details; Installation - Baumatic BF13 Instruction Manual

TECHNICAL DETAILS

MODELS
Voltage
Current
Radiant plate 1200W
Radiant plate 1700W
Hi-light plate 750/2200 W
Hi-light plate 1200W
Hi-light plate 1800W
Hi-light plate 2300W
Max power W

1. Installation

Installation is the buyer's responsibility. The manufacturer accepts no liability for this service. Any action that the
manufacturer has to take due to an erroneous installation will not be covered by the guarantee.
The flush-mounted cook tops are designed for installation in work tops made of all kinds of material, providing they
can withstand a temperature of 100°C, and are between 25 and 40 mm thick. If the cook top is installed in a
position so that the side of a kitchen unit comes up against its left-hand or right-hand side, the distance between
the vertical panel and the edge of the cook top must always be at least 150 mm. The distance between the back
wall and the edge of the cook top must be at least 55 mm. A partition made of insulating material (wood or the like)
must be inserted between the cook top and the space below. This partition must be at least 10 mm from the
underside of the cook top tray.
X = minimum 150 mm
Z = 10 mm
Y = partition
Fixing the cook top to the unit
The cook top is fixed to the unit by means of the brackets and accessories provided. Holes are provided in the
bottom of the tray where the tabs (A) are inserted so that you can attach the screws (C) that hold the brackets (B)
in place.
A = tab for inserting in the bottom of the
cook top tray
B = fixing bracket
C = screw
BF13 BF13- BF14 BF14.1
230V 230V 230V
30 A 27 A 27 A
- - -
2 2 2
1 2 2
1
6500 6000 6000
5
BF15.5 BF15SS BF17SS
230V 230V 230V
30 A 30 A 30 A
1 1 1
2 2 2
1 1 1
6400 6400 6400
230V
30 A
2
1
1
-
-
6300