Electrical Connection - Baumatic B725SS Instruction Manual

ELECTRICAL CONNECTION

Before connecting the appliance, ensure that the supply voltage
marked on the Rating Plate corresponds with the mains supply
voltage.
WARNING – THIS APPLIANCE MUST BE EARTHED
This appliance should be wired into a 13Amp double pole switched
fused spur outlet having 3mm contact separation and the fuse rating
reduced to 3Amps, and placed in an easily accessible position adjacent
to the appliance.
IMPORTANT
The wires in the mains supply lead are coloured in accordance with
the following code: -
Green and Yellow
Blue
Brown
The connection must be made as follows: -
The wire coloured Green and Yellow must be connected to the
terminal marked 'E' or the earth symbol ⊥ or coloured green or green
and yellow.
The wire coloured Blue must be connected to the terminal marked 'N'
or coloured blue or black.
The wire coloured Brown must be connected to the terminal marked
'L' or coloured brown or red.
NOTE: The terminals marked 'SUPPLY' are for the mains supply
wires and the terminations marked 'LOAD' are for the appliance
wires. The electrical outlet is to be positioned in an easily accessible
position adjacent to the appliance. In the event that it is necessary to
replace the mains lead, the replacement must conform to the
specification listed in the Technical Data ensuring the correct colour
code connection and that all screws are tightened sufficiently.
– Earth
– Neutral
– Live
23