Baumatic B725SS Instruction Manual page 15

INSTALLATION PREMISES
For correct operation of the appliance, sufficient natural ventilation
must be provided in the room for combustion of the gas.
Installation personnel must follow the safety regulations in force in
the country. The room must be ventilated directly via inlets on the
outside walls.
The inlets must have a free section of at least 100 cm² (one or more
inlets can be provided).
Combustion products must be discharged by means of extractor
hoods connected to the flue or directly to the outside.
If it is not possible to install an extractor hoods, an electric fan must
be fitted either to the outside wall or the window; the room must be
provided with ventilation inlets in compliance with current
regulations. The fan flow rate must be able to guarantee an hourly
exchange of air 3-5 times the volume of the kitchen.
This appliance must be correctly installed by a suitable qualified
person strictly in accordance with the manufacturer's instructions.
The manufacturer declines any responsibility for injury or damage to
persons or property as a result of improper installation of this
appliance.
The housing, adjacent furniture and all materials used in installation
must be ale to withstand a minimum temperature of 85°C plus
ambient during periods of operation. In addition, adjacent furniture
cabinet doors must be at a minimum distance of 4mm from the
appliance at all points.
This range of ovens has been designed to be located under a worktop
surface.
13