Use - Qilive Q.6522 User Manual

4.4 Level doors
EN ES
If two doors of the refrigerator are not aligned, adjust the height of the two doors to be in a horizontal
level.
1. Open the door.
2. Use a wrench (not supplied) to loosen the locking nut, then to rotate the adjusting nut clockwise
to lower the door, or counter clockwise to raise the door.
3. Once the doors are aligned, tighten the locking nut by rotating it counter clockwise.

5. USE

5.1 Commission the refrigerator
1. After transport, unpacking and installation, let the refrigerator rest for 2 hours in vertical position.
2. Clean the refrigerator and its components (CLEANING AND MAINTENANCE).
3. Connect the power plug to a wall outlet.
4. Set the refrigerating chamer temperature to a high level (TEMPERATURE CONTROL
(REFRIGERATING CHAMBER)).
5. Let the refrigerator run for 24 hours before inserting fresh or frozen foods.
5.2 Description of features
You must unlock the control panel before you can change any setting, then lock the control panel to
activate the setting after the setting is changed.
Press and hold the LOCK/UNLOCK button for 3 seconds to unlcok or lock the control panel. When
the control panel is unlocked, the
the icon lights up on the display.
5.2.1 Temperature control (refrigerating chamber)
Unlock the control panel, and press repeatedly the REF.TEMP. button to set a temperature. The
setting scope is betwen 2°C and 8°C. Then lock the control panel to make the setting work. The set
temperature is displayed.
5.2.2 Temperature control (freezing chamber)
Unlock the control panle, and press repeatedly the FRZ.TEMP. button to set a temperature. The
setting scope is -16°C and -24°C. Then lock the control panel to make the setting work. The set
temperature is displayed.
Unlevel
icon lights up on the display. When the control panel is locked,
Locking nut
10 10
Adjusting nut
Wrench