Parts Name And Functions; Control Panel - NEC MultiSync EA242F User Manual

Parts Name and Functions

Control Panel

Item
1 Ambient Light Sensor
Human Sensor
2 INPUT/SELECT
3 MENU/EXIT
4 LEFT/RINHT/
UP/DOWN*
2
5 ECO/RESET
6 Power
7 Power LED
*1: When the [HOT KEY] function is [OFF], this function is disabled.
*2: Depending on the [OSD ROTATION] setting, [LEFT], [RINHT], [UP] and [DOWN] key guides are displayed at the
Detects the level of ambient lighting and the presence of a user, allowing the monitor to make adjustments to
various settings resulting in a more comfortable viewing experience. Do not cover this sensor.
Enters sub-menus in the OSD menu when the OSD menu is open.
Shows a switching menu for the input source when the OSD menu is closed.
You can directly change to the [L/B] (LOW BLUE LINHT) mode by touching this key for 3 seconds or more when
the OSD menu is closed.* 1
Opens the OSD menu. Closes the OSD sub-menus and main menu. You can restore the saved settings in the
[CUSTOMIZE SETTINN] by touching this key for 3 seconds or more when the OSD menu is closed.
When the OSD menu is open, navigates through the OSD menu.
When the OSD menu is closed, touch one of the following keys to open the menu for the function indicated.*
key: [BRINHTNESS]
key: [VOLUME]
When the OSD menu is open, this key sends a reset command for the OSD settings.
When the OSD menu is closed, this key switches the [ECO MODE] status. You can set a mode from [OFF], [1]
and [2].*
1
Activates the [AUTO ADJUST] function by touching this key for 3 seconds or more when the OSD menu is closed
(analog input only)* 1 .
Turns the monitor on and off.
Indicates that the power is on or off.
Function
English−12
, , , keys differently (see page
1
44).