Table of Contents
Advertisement
Connecting to a Computer with DisplayPort
•
Please use a DisplayPort cable with the DisplayPort compliance logo.
•
It may take a moment for the signal to appear after turning on the computer.
•
When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear.
•
Some DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.
•
If the monitor's power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this
case, please turn off the computer then turn it on again.
Connecting to a Computer with USB Type-C
•
When using USB-C port for video / audio, please use SuperSpeed USB 10Nbps (USB 3.1 Nen 2) cable with USB
compliance logo.
•
Hi-Speed USB (USB 2.0) cable or charging cable doesn't support video / audio transmission.
•
When using USB-C port for video / audio, please use computer port with DP Alt Mode compliance logo.
•
HDMI Alt Mode or MHL is not supported.
•
When using computer battery charging (Power delivery), please use computer and cable with USB Power Delivery
compliance logo.
•
It may take a few seconds for the monitor to recognize the USB signal. Do not disconnect or reconnect the USB cable while
the signal is being recognized.
Connecting USB Devices
•
It may take a few seconds for the monitor to recognize the USB input. Do not disconnect the USB cable or disconnect and
reconnect the USB cable before the monitor recognizes the input.
•
Before turning off the power switch of the monitor or shutting down Windows
the USB device from the monitor. Data may be lost or corrupted if the USB device is not disconnected properly.
®
, please turn off the USB function and remove
English−15
Advertisement
Table of Contents
