Settings; Running The Pump - Merck Milipore Cellicon Perfusion Solution for Process Development User Manual

Cellicon Perfusion Solution for Process Development User Guide
TM

Settings

Selecting an element in the settings menu
will open the screen for that element,
and will be indicated by a darker grey
background. The elements include System,
Sensors, Alerts, Controls, External Interfaces
and User Accounts. Refer to the example
below:
System Screen Selected
Running the
Pump
Start/Stop
Start and stop the pump from the control
region of the main screen. If the pump is
off, the button will read
START
pump is on, the button will read
Stopping the pump will cause a confimation
screen to appear.
Prime System
The pump needs to be primed to reduce
damage to cells because the design is not
positive displacement.
Prime system
region of the main screen. Fill the flow
path with liquid prior to starting the prime
sequence.
PUMP. If the
STOP PUMP. The system will switch into speed setpoint
mode if
Prime system
pump is off. If
when the pump is running, the priming
guidance will start with the pump in the
current setpoint mode.
Prime System Guidance Step 1
Prime System Guidance Step 2
is accessed from the control
is selected when the
is selected
Prime system
7