Table of Contents
Advertisement
Cellicon
Perfusion Solution for Process Development User Guide
TM
Starting the System
The system must be fully assembled prior to operation, as described
in
Setting Up the
System. The filter assembly must be installed and
the pump and sensors connected before starting a run.
Press the power button on the left side of the controller to turn it on.
The button should light up blue when the controller is on.
Powering up the system launches the perfusion control software. The
initial screen is the username selection screen.
After selecting the username, the password screen will appear.
Touch the white box on the screen to open the keyboard. Enter the
password and touch
to log into the system.
Login
User Interface
The main screen of the system has four regions:
•
Menu
•
Piping and instrumentation diagram (P&ID)
•
Control
•
Status
The menu region and the status region are always visible. The P&ID
and control regions are only visible when
menu region.
P&ID
Main Menu Screen
is selected on the
Control
Menu
Control
Data
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Milipore Cellicon Perfusion Solution for Process Development and is the answer not in the manual?