Cleaning, Maintenance And Disposal - Omron Sysmac NYP-0 Series Hardware User Manual

Cleaning, Maintenance and Disposal

• Do not use corrosive substances to clean the product. Doing so may result in the failure or malfunc-
tion.
• Periodically check the installation conditions in applications where the product is subject to contact
with oil or water.
• As the rubber gasket will deteriorate, shrink, or harden depending on the operating environment, pe-
riodical inspection is necessary.
• Dispose of the product and batteries according to local ordinances as they apply.
• Dispose in accordance with applicable regulations.
• The following information must be displayed for all products that contain primary lithium batteries
with a perchlorate content of 6 ppb or higher when shipped to or transported through the State of
California, USA.
Perchlorate Material - special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
• The product contains a lithium battery with a perchlorate content of 6ppb or higher. When exporting
an end product containing the product to or shipping through California, USA, label all packing and
shipping containers appropriately.
NY-series Industrial Panel PC Hardware User's Manual (W555)
Precautions for Safe Use
21